HP ZBook Fury 15 G7 Hackintosh: Sequoia, OpenCore 1.0.8 and HP Brightness Keys
A documented HP ZBook Fury 15 G7 EFI with OpenCore 1.0.8, an HP brightness-key fix, software update discovery and clearly recorded limitations.
After my ThinkPad E490 Hackintosh project, I documented the configuration running on my HP ZBook Fury 15 G7. This machine uses an Intel Core i7-10850H, Intel UHD 630 graphics and macOS Sequoia 15.7.7 with OpenCore 1.0.8 RELEASE.
The EFI is available with its personal identifiers removed, together with setup instructions, a full configured-kext inventory and the source of the custom brightness-key wrapper:
This is a record of one working installation, with several remaining limitations. The same ZBook model was sold with different hardware, and this EFI has not been tested on every variant.
Hardware and tested software
| Component | Configuration |
|---|---|
| Laptop | HP ZBook Fury 15 G7 |
| Processor | Intel Core i7-10850H, 6 cores / 12 threads |
| Graphics used by macOS | Intel UHD Graphics 630, Metal 3 reported |
| Display | Internal 1920 × 1080 panel, 60 Hz |
| Memory | 32 GB DDR4 |
| macOS storage | WDC PC SN730 512 GB NVMe, TRIM enabled |
| Wireless | Intel Wi-Fi, itlwm 2.3.0 + HeliPort |
| Bluetooth | IntelBluetoothFirmware / IntelBTPatcher + BlueToolFixup |
| Audio configuration | AppleALC, layout 66 |
| SMBIOS | MacBookPro16,2 |
| macOS at publication | Sequoia 15.7.7, build 24G720 |
| Bootloader | OpenCore 1.0.8 RELEASE |
The exact discrete GPU SKU and audio codec were not independently recorded. The discrete GPU is excluded from macOS using -wegnoegpu; external-display routing remains unverified.
What is verified
The machine boots after the OpenCore and kext updates. Intel graphics acceleration and the internal display are active. Wi-Fi works through HeliPort, Bluetooth works, and the brightness slider and Fn volume controls work. The HP brightness-key fix described below also restored Fn+F3/F4.
Battery reporting and the CPU power-management drivers are active. Software Update now discovers newer releases after the RestrictEvents change.
There are still gaps in the physical test matrix: sleep/wake, every USB port, camera, external displays, Thunderbolt, audio recording and the headphone jack have not all been verified. Their drivers or ACPI tables being present is not enough to mark those features as fully working.
Updating OpenCore and the kexts
OpenCore was upgraded from 1.0.5 to 1.0.8 using the official RELEASE package. The corresponding drivers and tools were updated, while the existing HfsPlus driver was retained. The config gained the driver HideVerbose fields needed by the newer schema and passed the matching 1.0.8 ocvalidate check.
The updated components include:
| Component | Included version |
|---|---|
| Lilu | 1.7.2 |
| WhateverGreen | 1.7.1 |
| VirtualSMC and sensor/battery plugins | 1.3.8 |
| AppleALC | 1.9.8 |
| BlueToolFixup | 2.7.2 |
| USBToolBox | 1.2.0 |
| VoodooRMI | 1.4.3 |
| VoodooSMBus | 3.0 |
| RestrictEvents | 1.1.6 |
Not every inherited kext was replaced just because a stable release had a different number. Some installed Intel components are rolling builds, and the legacy wireless stack is tied to the existing installation. The repository’s complete inventory distinguishes configured entries, plugins and disabled copies.
Fixing HP Fn brightness keys
The brightness slider worked, but the keyboard brightness controls did not. This meant that backlight control itself was available; the missing part was the path from the firmware key event to the macOS brightness handler.
On the audited firmware, _Q86 and _Q87 dispatch brightness events through \_GPE.G001. The original implementation notified DD1F, while the BrightnessKeys fallback on this machine could handle \_SB.PCI0.GFX0.DD02.
The fix has two parts:
- Rename the original
G001method definition toZ001using a single-match ACPI patch. - Add an SSDT wrapper named
G001that sends events0x86and0x87toDD02on Darwin. Other events and operating systems call the originalZ001implementation.
The rename is deliberately constrained to the recorded DSDT: table ID 8783 , length 184887 bytes, and one match. This is firmware-specific. A BIOS update or another Fury G7 variant needs its ACPI checked rather than assuming the byte pattern will remain valid.
After reboot, Fn+F3/F4 worked. The DSL source and patch details are included so the change can be reviewed and adapted.
Wi-Fi, location and the clock
Intel Wi-Fi works using itlwm + HeliPort. HeliPort is installed in macOS separately and can be added to Login Items; it is not part of the EFI directory.
The limitation is that itlwm exposes the card to macOS as an Ethernet interface. The native Wi-Fi information needed for Location Services is therefore unavailable in this setup. OpenIntelWireless documents this Location Services limitation.
The clock problem on this installation was a separate, concrete setting: the selected time zone was US/Pacific. Changing it to Europe/Istanbul corrected the 11-hour difference. A manually selected time zone does not require working location detection; automatic clock synchronization is a separate setting.
Clock errors specifically after switching between Windows and macOS would need a separate RTC check. No Windows registry clock modification is part of this EFI release.
Making software updates appear
Although newer Sequoia releases were available, softwareupdate --list reported no new software. The installed config had no RestrictEvents update-eligibility patch.
I added RestrictEvents 1.1.6 and scoped it to:
1
revpatch=sbvmm revblock=none
According to the upstream documentation, sbvmm forces the VMM Secure Boot model used for OTA eligibility. revblock=none leaves process blocking disabled.
After reboot, the kext was loaded and the scan offered:
1
2
macOS Sequoia 15.8.2 — 24H232
macOS Tahoe 26.7.2 — 25G332
This verifies update discovery, not a completed OS upgrade. The published configuration was still running 15.7.7. Tahoe appearing in the list does not make it tested on this hardware. The existing legacy networking/root-patch dependencies need to be reviewed before installing an update.
CPU performance: what remains unresolved
The CPU power-management investigation did not establish a complete fix. In the recorded macOS workload, sustained package power settled near 25 W, with a clock around 2.75 GHz. Short turbo peaks were much higher. Windows sustained a higher clock and power level in its test, but the workload implementations differed, so these readings do not justify a percentage performance comparison.
Trials with MacBookPro16,1 power-management data and then its SMBIOS did not improve sustained throughput. Those trials were reverted, leaving MacBookPro16,2 and the original CPUFriend provider payload. The provider’s frequency-vector data matches the original Air-derived profile; the SMBIOS itself remains a MacBook Pro.
Intel Dynamic Tuning was disabled in BIOS before the Windows test and the following macOS comparison. That did not remove the observed macOS behavior. Read-only diagnostics also showed that the recorded 25 W behavior was not simply a 25 W PL1 value in MSR 0x610. The controlling mechanism remains unresolved.
Temporary diagnostic components were removed and confirmed unloaded after reboot. The public EFI contains no register-access driver, voltage adjustment or power-limit writer. The repository includes measurement notes without publishing raw hardware dumps.
Preparing the public EFI
The working EFI was copied and sanitized separately. The public package has:
- Empty
SystemSerialNumber,MLBandSystemUUIDfields. - A six-byte zero
ROMplaceholder. - No captured Bluetooth controller state or embedded itlwm Wi-Fi credentials.
- No old config, backup files, benchmark captures or private diagnostic logs.
The release builder validates the sanitized copy, checks referenced files, and generates archive and per-file SHA-256 checksums. It does not read the live EFI. GitHub Actions also runs the public-copy checks and OpenCore 1.0.8’s validator.
Before booting the download, generate your own MacBookPro16,2 identity with GenSMBIOS, fill in the blank fields and run the matching ocvalidate. Keep your own EFI backup and test from USB first.
Existing settings to understand before reuse
This snapshot preserves customized disabled SIP (FF0F0000), SecureBootModel=Disabled, AMFIPass and the legacy networking components from the existing installation. They are disclosed parts of this configuration, not a general recommendation for every Hackintosh.
It also retains multiple EC/USBX SSDTs and both USBMap and UTBMap. One inherited sleep rename is a no-op because its Find and Replace bytes are identical. These items need a separate cleanup and hardware-validation pass; the publication does not claim to have completed that work.
The setup guide explains identity generation, validation, USB testing and recovery. The configuration notes record the choices and remaining limitations in more detail.